Cousins HP2100X-A A-Arm Platform Automatic Stretch Wrapper, High Profile

  1-35 loads per hour
NOTE: Process rates will vary with load size, number of wraps & forklift load/unload time

  Maximum load weight: 5,000# dynamic 12,000# static
  Maximum load size: 50 W x 50 L x 80 H (71 Max.
   load diagonal)

  48 Octagonal, 5/16 thick, formed steel plate
  4 point caster support system
  Turntable height less than 11 from floor
  ANSI # 50 Direct Chain Drive c/w Chain tensioner
  3-15 RPM rotational speed c/w soft start acceleration
  3/4 HP DC Drive Motor
  Final Revolution Deceleration and positive stop alignment
  Front & back forklift ports for easy movement
  Accu-Count exact turntable positioning system for
   additional film savings!

  1/2 HP DC variable speed motor
  Belt/Pulley with Anti-Fall Device
  Maintenance free 12 point carriage guidance system

  Rapid Thread 20 capacity pre-stretch film carriage
  1/2 HP DC variable speed motor
  Fully electronic dynamic dancer corner compensation
  33 to 313% fixed stretch capability
  Pre-stretch ratio variable by easy sprocket change
  Rapid Thread (Safety Door) with auto power cut-off
   switch
  Carriage descent obstruction shut-off device for additional
   safety
  Side mounted film carriage for operator convenience and
   safety

Patent Pending Cousins exclusive patent pending
A-Arm cut and clamp device starts and ends the wrap process at the top of the load. This uniquely different approach to attaching and cutting the stretch film provides you with these benefits:

  Selectable top banding capability
  Stabilizes the load early in the wrap cycle
  Places the ending film tail at the top of the load instead of
   the bottom
  Eliminates the need of a film clamp power source on the
   turntable for easier maintenance
  No air hook-ups or noisy compressors
  Load placement on the turntable is not critical
  There is no film clamp on the turntable that can be
   damaged by debris or operator error

  PANASONIC PLC with Touchscreen Operator Interface
  Power Off On Reset Switch & Power On Indicator
   Light
  Single button Auto Wrap Cycle Start/Pause
  Cycle Pause for applying top sheets
  Reinforce wrap control for mid-wrapping
  Emergency Stop Button
  Turntable Jog Button
  Film Carriage Lower/Raise Buttons
  Film Tension (Force-to-Load) Control
  Selectable Reduced Film Tension parameters for
   wrapping top and/or bottom of load
  Separate Film Carriage Raise & Lower Speed controls
   Variable Turntable Speed Control
  Triple Beam Automatic Load Height Detection sensor for
   dark or shiny loads
  Separate 1 to 12 Revolution Top & Bottom wrap control
  Broken film/out of film detection c/w automatic machine
   reset
  Stack-light beacon indicates run, clear or fault
  NEMA 12 Enclosure
  Non-proprietary UL/CSA approved components
  3 wrap modes: auto / semi-auto / top banding
                    3 machines in one!

  All structural steel construction
  Forklift truck portable base structure design lifting tubes
   included for front and rear access
  Structural steel tube machine tower c/w sheet metal
   covers
  Electro-static powder coated paint finish

  115 Volts 1 Phase 60 Hz 20 Amps