PA2000T Label Printer/Applicator

Meet Demanding Applications with Maximum Uptime and Economical, Worry-Free Operation!

Compact – The PA2000 features a smaller footprint than other Printer/Applicators at 16.5” wide x 30” long for the H-400

or 19.5” wide x 30” long for the H-600. The PA2000 has a remote front panel for easy access, regardless of the

orientation of the applicator which allows it to be installed in locations where other Printer/Applicators cannot.

Easy To Use – The Tharo PA2000 Printer/Applicator is easy to use because it needs minimal adjustments and is quick

to setup or changeover to apply labels to either the top or side of a product.

Fast – The PA2000 is quick and accurate because it can apply up to 58 labels per minute depending on label size,

printer used and product height. A switching device, such as a foot switch, optical sensor or Programmable Logic

Controller (PLC) can be connected to the applicator’s PLC port to initiate the print and apply cycle.

LEDs provide visual operating status and error conditions.

Cost-effective – Due to the minimal training, quick integration and increased personal productivity, the PA2000

provides a rapid return on investment. It has all-metal construction and time-tested components that are made to last.

Controlled Contact – The PA2000 uses springs and an adjustable pressure sensing switch on the tamp pad to allow

for very precise label placement and controlled contact.

Easy To Service – The PA2000 is quick and easy to maintain and service because it has a limited number of

moving parts and the best technical support in the industry.

Exceptional Accuracy – The PA2000 is capable of label placement accuracy within 0.01” for stationary products

and 0.125” for moving products.

SPECIFICATIONS

Minimum Label Size:	.20" x .20" (5mm x 5mm) with specialty tamp 3" x 1" (76.2mm x 25.4mm) with Tamp Blow
Maximum Label Size:	6" x 8" (152.4mm x 203mm)
Placement Accuracy:	Stationary: +/- 0.01" (.25mm) or Moving: +/-0.125" (3mm) (for example: conveyor belt applications)
Speed:	Up to 58 labels per minute*
Weight of Applicator:	27 lbs (12kg) - 37 lbs (17kg)
Weight of Stand:	120 lbs (55kg)
Standard Stroke Length:	17" total (432mm) (10" (254mm) below table) Custom length cylinders are available upon request.
Air Requirement:	75 to 90 psi (5 to 6 bar)
Printer Type:	Tharo H-427, H-436, H-626 or H-634 Direct Thermal or Thermal Transfer Printers
Power Source:	Switchable: 100V 60Hz or 230V 50Hz
Environmental:	Temp 50-95ï¿½F (10-35ï¿½C) at 10-85% humidity
Standards:	Built to CE safety and emissions standards. RoHS compliant upon request.
* Speeds are approximate. Product size, label size, printer model and conveyor speed will determine actual throughput

Tharo PA2000T Label Printer/Applicator, Tamp Version