Electricorr VpCI-286 conformal coating was designed to extend long-life performance of new and repaired electronic assemblies, especially those which are under adverse corrosion conditions such as high heat and atmospheric humidity. This non-conductive coating is a technological breakthrough in a new generation of circuit board conformal coatings, combining outstanding moisture intrusion prevention as well as superior corrosion resistance with Vapor phase Corrosion Inhibitor technology. This coating protects printed circuit assemblies against contamination by providing a sealed microenvironment around the circuit board and its components. The VpCI coating forms a barrier against microscopic dendrite growth, termination and surface corrosion, moisture, fungus, dust and other environmental contaminants. It also enhances circuit reliability by prohibiting dangerous conditions such as leakage from high impedance circuits with high component density topography. Electricorr VpCI-286 is a single component formulation that is easier to use than two component coatings eliminating special metering and mixing equipment.Also, it contains an optical identifier visible with UV light, assuring rapid and effective visual confirmation of proper coating on surfaces.

Typical Applications: field repair of printed circuit boards and manufacture of printed circuit boards.
Features: conforms to the surface being coated, very low conductivity, continuous corrosion inhibition, fast drying, VOC free, easily removed with solvents for repair and fluoresces under UV light.
Application: spray a very light mist over the area needing protection. Dry to touch in 5 to 10 minutes. Dry film time of 24 hours. Shelf life is 1 to 2 years.